Key Features
Flat Panel TVs use LCD, Plasma, or today's new type of viewing screen OLED. LCD s (Liquid Crystal Displays) use liquid crystals as optical shutters, which control the amount of light passing through the thin display screen, creating vivid, life-like colors. LCDs are commonly used on microwaves, calculators and computers, as well as projection (up to 60") and direct view (10"-30") TVs. Plasma displays use a complex gas-based system. The benefits are a vivid, bright, clear picture with a slim form factor that can be mounted on a wall or on a pedestal. Plasma TVs range from 42 inches to 63 inches. OLED (Organic Light-Emitting Diode) can provide brighter, crisper displays on electronic devices and use less power than conventional light-emitting diodes (LEDs) or liquid crystal displays (LCDs) used today, it also can be viewed in bright lighting conditions, at greater angles.
Response time is the amount of time a pixel in an LCD monitor takes to go from a fully active (black) to fully inactive (white) and back to fully active (black) again. It is measured in milliseconds (ms). Lower numbers mean faster transitions and therefore fewer visible image artifacts. A faster LCD TV response time is suppose to render better, fast actions during movies, sport events, and gaming.
Diagonal Screen Size is the size of your TV screen, measured diagonally in inches.
Display Resolution measures picture quality in pixels. The more pixels a television can display, the sharper the image. More pixels also provide higher-quality color.
Display Resolution
1920 x 1080 pixels
Display Capabilities
The broadcast formats supported by your television dictate what sort of signals your television is able to receive and process. It is important that your television not only support but is also able to display the formats you wish to view. A supported format can be understood by your television, but not necessarily displayed in its optimum form. 1080i, 1080p and 720p are standards for HDTV, while 480p and 480i are standard definition formats.
Broadcast Format Displayed
1080p (HDTV), 1080i (HDTV), 720p (HDTV), 480p (EDTV), 480i (SDTV)
The broadcast formats displayed by your television dictate what sort of signals your television is able to receive and display. The number represents how big the picture will be, and the letter represents the way in which the image is refreshed. Generally, the higher the number, the more clearly it will show up on bigger screens. While progressive (p) formats refresh images twice as often as interlaced (i) formats, most users would not notice a significant difference between the two. 1080i, 1080p and 720p are standards for HDTV, while 480p and 480i are standard definition formats.
Broadcast Format Supported
1080p (HDTV)
There are various types of tuners that may be built into a television: NTSC (National Television System Committee) is the analog television broadcasting standard used widely in North America. It is referred to as a 525-line standard, but actually displays only 480 lines. NTSC is to be replaced with new DTV (Digital TV) standards in the coming years. \r\nThe PAL (Phase Alternating Line) standard was introduced in the early 1960's and was implemented widely in Europe. It has a wider channel bandwidth than NTSC as it runs on 635 lines. \r\nATSC (Advanced Television Standards Committee) creates the technical standards for the US digital television system (DTV). These standards are expected to be used in most new televisions, as the US television system shifts from analog to digital. \r\nQAM (Quadrature Amplitude Modulation) tuner is present in some new digital televisions and similar devices. It enables direct reception of digital cable channels without the use of a set-top box. QAM tuners can be likened to the cable equivalent of an ATSC tuner which is required to receive over-the-air (OTA) digital channels broadcast by local television stations.
Built-in Tuner
ATSC, NTSC, QAM
Native Aspect Ratio refers to the dimensions of the display of a television. It measures the units wide, by the units high. The two standard measurements for flat panel televisions and various types of projectors are 4:3 and 16:9. 4:3 produces a traditional square display. 16:9 produces a rectangular, wide screen display. One ratio is not necessarily better than the other. It all depends on the preferences of the consumer.\r\n
Traditional TVs have an aspect ratio of 4:3 (squarish), which represents the ratio of the width of the screen to the height. Widescreen TVs have an aspect ratio of 16:9 (also known as "letterbox", a rectangular shape). If you plan to watch a lot of DVD movies on your TV, you might want to consider a widescreen TV, as many DVDs support the 16:9 aspect ratio. If you have a widescreen TV and are viewing standard programming, the picture will appear in letterbox format, meaning that the picture will appear with black boxes on either side or the top and bottom of the screen.
Aspect Ratio
Widescreen (16:9)
Image Quality
Display Resolution measures picture quality in pixels. The more pixels a television can display, the sharper the image. More pixels also provide higher-quality color.
Display Resolution
1920 x 1080 pixels
Brightness, also known as luminance or photometric brightness, is the luminance intensity of any surface in a given direction. It is measured per unit of projected area of the surface as viewed from a single direction.
The Viewing Angle is the maximum side angle from which the viewer can see the screen clearly.
Speakers
Technical Features
A product that is Energy Star compliant meets the standards for energy efficiency set by the US Environmental Protection Agency (EPA).
Energy Star Compliant
Energy Star Compliant
Dimensions
Miscellaneous
