Product MPN
Key Features
Hubs: There are a large number of devices that can be called hubs, some of which are not usable on Ethernet networks, and others that are Ethernet hubs. For a small network, selecting a hub is generally a matter of getting a good price and anticipating your network's expansion. Switches: Devices that filter and forward packets between LAN segments. KVM (Keyboard,Video,Mouse) switches allows control over more than one computer and are popular among users who have upgraded their home PC systems and want to still use their old computers but do not want to invest in a second keyboard, monitor and mouse.
Layer 2 Switches (The Data-Link Layer) \r\nLayer 2 switches operate using physical network addresses. Physical addresses, also known as link-layer, hardware, or MAC-layer addresses, identify individual devices. Most hardware devices are permanently assigned this number during the manufacturing process. \r\nSwitches operating at Layer 2 are very fast because they only sort physical addresses, and don¿t look at the data packet very closely to learn anything more about where they are sent.\r\n \r\n Layer 3 Switches (The Network Layer) \r\nLayer 3 switches use network or IP addresses that identify locations on the network. They read network addresses more closely than Layer 2 switches, identifying network locations as well as the physical device. A location can be a LAN workstation, a location in a computer's memory, or even a different packet of data traveling through a network. \r\n \r\nSwitches operating at Layer 3 are smarter than Layer 2 devices and incorporate routing functions to actively calculate the best way to send a packet to its destination. Although they are considered "smarter", they may not be as fast if their algorithms, fabric, and processor do not support high speeds.
Included Modules
Fan Tray x 1
Standards and Protocols
These are the connection standards that the device supports. Make sure these match the compatibility of devices you want to connect to.
LAN Standards
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization, IEEE 802.3af Power over Ethernet
Management Protocols refer to the protocols that are supported by the device, to be used for management, configuring and monitoring.
Remote Management Protocol
Telnet, RMON 2, SNMP 1, TFTP
Protocols indicate the signals that will be supported by the switch or hub connected to the device. Protocols define the syntax (arrangements, formats and patterns of bits and bytes) and the semantics (system control, information context or meaning of patterns of bits or bytes) of exchanged data, as well as other characteristics such as data rates and timing.
Protocols
BOOTP, TFTP, SNMP, VTP, CDP
Dimensions
Miscellaneous