Product MPN
Key Features
Defines the main function of the router.
Router Functionalities
VPN Pass-Thru, Firewall, DHCP Server
WLAN Standards
IEEE 802.11g/b
Interfaces
Built-In
4-port Built-In Switch
LAN Interfaces
10/100 Base-T
When purchasing as router for use with a wide-area, keep in mind that wide-area networking spans many different devices and services. Interface considerations will vary depending upon the type of service and the kinds and amount of traffic that will be sent over it.
WAN Interfaces
1 x 10/100 Base-T
Standards and Protocols
LAN Standards
IEEE 802.3 CSMA/CD or Ethernet, IEEE 802.3u 100 Mbps (Fast Ethernet)
Protocols are agreed upon formats for translating data between devices. Protocols determine many different aspects of the data including, error checking, compression types as well as indications of delivery and retrieval by devices. There are a variety of standard protocols from which programmers can choose. Each with its particular advantages and disadvantages; meaning that, some are simpler than others, some are more reliable, and some are faster. For the user, it is important that the device have the correct protocols in order to be able to communicate with other computers.
A network protocol is a formal set of rules, conventions and data structure that governs how computers exchange information over a network. Network protocols are defined by many standard organizations and technology vendors over years of technology evolution and developments worldwide.
Remote Management Protocol
HTTP
Firewall / VPN
Firewall Features
URL Filtering, MAC Address Filtering, IP Filtering, NAT
VPN Protocols
IPSec Pass-Thru, PPTP Pass-Thru, L2TP Pass-Thru
Wireless
802.11b Data Rates
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
802.11g Data Rates
108 Mbps, 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 28 Mbps, 12 Mbps, 9 Mbps, 6 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
802.11b/g Indoor Range
100 meter
There are many standards of modulation. The following are some of the most commonly used types. DSSS DSSS (Direct-Sequence Spread Spectrum) is a transmission technology that combines the data signal with a higher data rate bit sequence called a chipping code. This improves noise resistance and data integrity. OFDM OFDM (Orthogonal Frequency Division Multiplexing) transmits digital data over a radio wave by splitting a radio signal into multiple sub-signals. These are then transmitted simultaneously at different frequencies. This modulation technique reduces the amount of crosstalk in signal transmissions. CCK CCK (Complementary Code Keying) uses a set of 64 eight-bit code words to encode data for 5.5 and 11Mbps data rates in the 2.4GHz band of 802.11b standard. The code words have unique mathematical properties. This allows them to be correctly distinguished from one another by a receiver even in the presence of substantial noise and interference.
Modulation
OFDM, CCK, QPSK, BPSK, DBPSK, DQPSK, 16QAM, 64QAM, DSSS
802.11b/g Outdoor Range
400 meter
All wireless access points should offer some sort of security against completely open access of the data you are transmitting. These are the security standards that this device adheres to.
WEP data encryption is defined by the 802.11 standard to provide two main security features to a network. The first is to prevent access to the network by "intruders" using similar wireless LAN equipment. The second is to prevent eavesdropping of wireless LAN traffic. WEP works by allowing an administrator to set defined respective 'keys' for each wireless network. Access is denied by anyone who does not have a key.
WEP Encryption Length
128 bit
Internal antennas are built into the device and can not be changed or directed. External antennas can be directed to point in different directions; this may be used to increase range of the device. Detachable antennas are screwed into the device and can be upgraded or replaced easily.
Antenna Type
Detachable Antenna x 1
Other Features
LED Indicators
Power, WAN, WLAN (Wireless LAN)
Dimensions
Miscellaneous
