Product MPN
Key Features
Are you searching for a Tuner or a Receiver.
All the different types of surround sound that are available on this receiver. When x.1 is added to the numerical number the surround sound also affects the subwoofer.
Number of Channels
7.1 Channels
Stereo Mode Power
90 Watt @ 8 ohm, 20 Hz - 15 kHz
Surround Mode Power
90 Watt @ 8 ohm, 20 Hz - 20 kHz
Dolby® Digital Has been around for a while now and is probably the most popular format for digital surround sound. 5.1-channel Dolby Digital provides a bitstream of digital data of up to six channels supplying the front left and right, center, surround left and right, and a subwoofer. DTS Just like Dolby Digital, DTS also provides 5.1 channels of digital audio but with less compression, this gives a slightly more accurate sound reproduction. Most home theater receivers include decoding for Dolby Digital and DTS. DTS-ES Is a slight improvement on DTS, it basically provides an extra channel (6.1). This extra channel is a discrete, full-bandwidth back surround channel that can be played through one or two extra speakers. Presently only a few DVDs are encoded with 6.1-channel DTS-ES sound. DTS NEO 6 An even newer development from DTS, allowing lower quality recordings in matrixed stereo (such as analogue TV broadcasts or VHS video recordings) to be generated into five or six full-bandwidth channels of sound for 5.1 and 6.1 systems. Dolby® Pro Logic® An older form of four channel home theater surround this consists of front left and front right, center and surround channels matrixed from the regular left and right channels. Dolby Pro Logic II Is a 5.1 channel system that takes a stereo or Dolby Pro Logic soundtrack and converts it to 5.1 playback. Benefits will include a greater surround sound experience and deeper bass. THX EX Is designed to give surround sound improved directionality. THX EX provides a more fully 360° wraparound experience by adding another one or two "back surround" speakers to the speakers already present in a 5.1-channel system. The added channels share a matrixed channel of sound composed of information from the regular surround channels.
Surround Sound
DTS ES®, Dolby Pro Logic II, DTS Neo:6, DTS 96/24, Dolby Digital® EX, Dolby TrueHD, DTS-HD, DTS-ES Discrete 6.1, Dolby Digital Plus (DD+)
Broadcast Format Supported
480p (525p), 720p (750p), 1080i (1125i), 1080p (1125p)
Inputs / Outputs
Front A/V Connections
Composite x 1, S-Video x 1, Analog Audio x 1
Convenience
Impedance is the load value (resistance), measured in ohms, that the speakers present to the amplifier. A speaker's impedance fluctuates while playing music, but speakers are usually given a single nominal impedance rating. For optimal sound, check the impedance on your speakers, and choose a receiver will output enough power to drive them.
Speaker Impedance
6 Ohm, 8 Ohm
Using the Speaker Selection function allows you to choose which speakers use which impedance. For example, if Speaker A is 4 ohms, and Speaker B is 8 ohms, then selecting A+B will give you 4+8 ohms impedance, thus providing more power to the speakers. This is typically an option on higher-end receivers.
Miscellaneous
Power Consumption
0.3 Watt
