Pelco WCS4-20 Camera Power Supply 20Amp 4 Fused Outputs

Power supplies in the WCS Series offer a variety of configurations for powering up to four outdoor units from a single power source. The power supplies provide 24 VAC output for 1?4 units, dependin... more

Power supplies in the WCS Series offer a variety of configurations for powering up to four outdoor units from a single power source. The power supplies provide 24 VAC output for 1?4 units, depending on the model selected. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available on the WCS4-20. The power supplies have a selectable input of 120 or 240 VAC. For integrated systems such as Spectra and Esprit, the powersupplies are capable of handling pan/tilt, heater, and blower operation in addition to the camera (see application chart). The WCS1-4 has one fused output and is capable of handling up to 4 amps (100 VA) of total load. The WCS4-20 is a four-output supply capable of handling up to 20 amps (480 VA) of total load. This model is available with either fuses or self-resetting circuit breakers on each output. Fuses provide a greater degree of protection for the unit because they are faster acting and more precise. Circuitbreakers will self-reset when the fault is corrected, eliminating the need for replacing fuses. However, the amount of current required to trip a circuit breaker can vary as much as 100 percent, depending on temperature. In the fused models, the values of fuses can be changed depending upon the specific current requirements of theequipment connected. FEATURES: 4 or 20 Amp Capacities 1-4 Outputs 120 VAC or 240 VAC Selectable Input 24 VAC Output or 28 VAC Output for Longer Wire Runs Meets NEMA Type 4X/IP66 Standards for Weath... less